SolventJET Support

SolventJET II Parts
.
The following is a list of parts available from your SolventJET dealer.
.

	SolventJET II Series 2 Pump New long-life modified pumps for solvent printing. Part# ENV-PUMPV2SJ1 .
	SolventJET II Print Head Caps Print head capping station. Replace when swollen or every 6 months. Part# ENV-SJ2CAP .
	SolventJET Wiper Printhead wiper (do NOT use a Roland felt wiper!). Printer uses 2 wipers. Part# ENV-SJWIPER .
	SolventJET Wiper Scraper Printhead wiper scraper. Cleans the wipers. Part# ENV-SJSCRAPER .
	SolventJET II Surge Mist Sponge Pad printer use to purge the printheads into. Replace when pad begins to swell. Part# ENV/ROL-100000415 .
	SolventJET II Print Head Print heads used in SolventJET II. Please note that installation requires precise alignment. We suggest getting installation from your supporting dealer. Part# ENV-22805470 .
	SolventJET II Damper 2 per printhead, 6 printheads. Can be identified by the black dot on top and green line on side. Part# ENV-6081181100 .
	Replacement Cap to Pump Tubing (Clear) Set of 6 replacement tubes that run from printhead cap to the pump. Part# ENV-RTU106 .
	Replacement Cap to Pump Tubing v2 (Black) Set of 6 replacement tubes that run from printhead cap to the pump. Part# ENV-BLACKTUBE .

All service parts not installed by a certified SolventJET technician are non-returnable and Splash of Color assume no responsibility for damage incurred by installation. Only returns for defective or unopened parts is available.